Overview

The RØDE NT6 is specifically designed for difficult mounting applications. Although clearly relevant to instrument miking, the new NT6 is extremely well suited to any situation where a small 'unobtrusive' but powerful microphone system is required.

The 1/2" (externally biased) gold sputtered capsule is designed to attach to a custom made, multi-position swivel mount allowing it to be independently positioned with ease. The capsule is connected to the remote pre-amplifier (body) by a custom 3m Kevlar® fibre reinforced cable.

The surface-mount pre-amplifier circuit also incorporates a two position variable pad: 0 dB and -10 dB attenuation, and a 2-position variable high-pass filter that enables you to step from a flat response to 80Hz high pass filter; both conveniently located away from the capsule, providing additional control without the need to move the capsule once in position.

Features

• Externally biased condenser
• Gold sputtered 1/2" capsule
• Two position PAD - 0dB and -10dB
• Two position High-Pass Filter - flat and 80Hz
• Convenient two-axis swivel mount and 3m Kevlar® fibre reinforced cable included
• Heavy-duty satin-nickel plated body
• Surface mount circuitry
• Low noise and full frequency response

Specification

• Power: P48 (48V), P24 (24V) phantom supply
• Acoustic Principle: Pressure gradient
• Directional Pattern: Cardioid
• Frequency range: 40Hz-20kHz, selectable HPF @ 80Hz/12dB/octave
• Output impedance: 200Ω
• Signal noise ratio: 75 dB SPL (A - weighted per IEC651)
• Equivalent noise: 19 dB SPL (A - weighted per IEC651)
• Maximum SPL: 135dB SPL (@ 1kHz, 1% THD into 1KΩ load)
  (145dB with maximum PAD)
• Maximum output voltage: +6dBu (@ 1kHz, 1% THD into 1KΩ load)
• Sensitivity: -37 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
• Weight: 386gm
• Dimensions: 188.4mmH x 64mmW x 20mmD

What's Included

• NT6 Microphone
• Custom swivel mount
• ZP1 zip pouch
• WS5 windshield