Overview

The D-PowerPlug is effectively a 'Turbo Charger' for Dynamic microphones.

Using conventional microphones with long multi-core cables results in a dramatic loss of signal strength, and sound quality due to cable resistance and capacitance. Featuring a precision instrumentation grade pre-amplifier circuit, D-PowerPlug will turn any standard dynamic microphone into a high-gain, electronically balanced output device.

Powered by standard P48-volt phantom power, D-Power Plug can drive cables in excess of 100m with negligible loss of signal quality or power.

Compatible with standard XLR connectors.

Specification

Rode D-Power Plug Features:

• Instrumentation grade pre-amplifier.
• Balanced input and balanced output.
• Minimum losses over long cable runs.
• P48V phantom powered.
• Gain: +20 dB.
• Input Level (nominal): 1 mV.
• Output Level (nominal): 10 mV.
• Frequency Response: 20 Hz~20 kHz (-3 dB)
• Input impedance: 100 k ohm balanced/arm.
• Output Impedence: 100 ohm balanced.
• Noise: -116 dB A-Wt RTI.
• Max. Input: 0.8 Vp-p.
• Max. Output: +11.4 dBu @ 1% THD (8 Vp-p).
• Input Connector: XLR 3 PIN Female.
• Output Connector: XLR 3 PIN Male.
• Pin Assignment: Pin 1 GND,
• Pin 2 Signal (+),
• Pin 3 Signal (-).
• Current Consumption: 3 mA @ 48V.
• Weight approx.: 73.8 grm